Using Smartshare - LG PRADA P940 User Manual

1. I I n Idle mode, open the
application list and select
settings > wireless & network
> wi-fi direct settings > ok >
wi-fi direct.
2. Press menu
3. Select a device and then select
Connect. When the owner of
the other device accepts the
connection, pairing is complete.
4. To deactivate the WLAN Direct
feature, select disconnect wi-fi
direct.
note:
forced G/o mode(forced
Group owner mode) – touch
44
to activate group owner mode,
which enables the legacy wi-fi
devices to connect by scanning
your phone. in this case you
must enter the password that
is set in the menu > advanced >
password.
using smartshare
SmartShare uses DLNA (Digital
Living Network Alliance)
technology to share digital content
through a wireless network.
Both devices must be DLNA
certified to support this feature.
> scan.
to turn smartshare on and allow
sharing contents
1. Touch applications tab
select smartshare.
Press the menu key and select
2.
settings.
3. Touch always accept request if
you would like to automatically
accept sharing requests from
other devices.
4. Touch receive files if you would
like to automatically allow the
upload of files to your phone
from other devices.
Touch discoverable checkbox to
5.
turn on.
6. Under the Sharing contents
section, touch to checkmark the
types of content you would like
to share. Choose from pictures,
videos and music.
7. smartshare is now activated
and ready to share contents.
to share contents from remote
content library to other devices
Let your renderer device (e.g. TV)
play multimedia contents from your
remote content library (e.g. PC).
and