Most of WAP gateways do not require a User ID and Password.
If your gateway need them to connect to it, then your network
should provide them, and you must set them up correctly before
trying to browse a WAP site.
These values of setting are provided by yours network.
: Enter the IP address of the WAP gateway you
are using to access.
: Enter the telephone number to dial to access
your WAP gateway.
: Select the type of data call.: Analogue or ISDN
(Digital).
: The speed of your data connection.
: The user identity for your dial-up server (and
NOT the WAP gateway).
: The password required by your dial-up server
(and NOT the WAP gateway) to identify you.
The service settings are only available when GPRS is chosen as
a bearer service.
: Input the IP address of the WAP gateway you
access.
: Input the APN of the GPRS.
: The users identify for your APN server.
: The password required by your APN server.
71