Network Settings; Automatic; Manual; Preferred - LG F2400 User Manual

Network settings

You can select a network which will be registered
either automatically or manually. Usually, the network
selection is set to Automatic.

Automatic

If you select Automatic mode, the phone will
automatically search for and select a network for you.
Once you have selected "Automatic", the phone will
be set to "Automatic" even though the power is off
and on.

Manual

The phone will find the list of available networks and
show you them. Then you can select the network
which you want to use if this network has a roaming
agreement with your home network operator. The
phone let you select another network if the phone fails
to access the selected network.

Preferred

You can set a list of preferred networks and the phone
attempts to register with first, before attempting to
Menu 7-6
register to any other networks. This list is set from the
phone's predefined list of known networks.

Reset settings

You can initialize all factory defaults. You need
Menu 7-6-1
Security code to activate this function.
GPRS settings
You can set GPRS service depending on various
situations.
If you select Power on and you are in a network that
Menu 7-6-2
supports packet data, the phone registers to the GPRS
network and sending short messages will be done via
GPRS. Also, starting an active packet data connection,
for example, to send and receive e-mail, is quicker. If
you select When Needed, the phone will use a packet
data connection only if you start an application or
action that needs it. The GPRS connection is closed
after it is not used by any application.
Menu 7-6-3
n
Note If there is no GPRS coverage and you have chosen
Switch on, the phone will periodically try to
establish a packet data connection.
Settings
Menu 7-7
Menu 7-8
73