Step 2 : Setting Up The Remote Commander - Sony SLV-D570H Operating Instructions Manual

Step 2 : Setting up the remote commander

Inserting the batteries
Insert two size AA (R6) batteries by matching
the + and – on the batteries to the diagram
inside the battery compartment.
Insert the negative (–) end first, then push in
and down until the positive (+) end clicks into
position.
Reattach the cover after inserting the battery.
Using the remote commander
You can use this remote commander to operate
this DVD-VCR and a Sony TV. Buttons on the
remote commander marked with an orange dot
(•) can be used to operate your Sony TV.
If the TV does not have the
remote sensor, this remote commander will not
operate the TV.
To operate Set TV / DVD·VIDEO switch to
the DVD player DVD·VIDEO, then press SELECT DVD and point at the remote sensor at the
DVD-VCR
the VCR DVD·VIDEO, then press SELECT VIDEO and point at the remote sensor at the
DVD-VCR
your TV TV and point at the remote sensor at your TV
symbol near the
TV / DVD·VIDEO
switch
SELECT VIDEO
SELECT DVD
Remote sensor
Setting up the remote commander
continued
US
11