Toyota Corolla 2020 Quick Reference Manual page 37

LANE TRACING ASSIST (CONTINUED)
The LTA function
to the driving assist system information screen.
(1) The system displays solid white lines on the LTA indicator when visible lane
markers on the road are detected. A side flashes orange to alert the driver when the
vehicle deviates from its lane.
(2) The system displays outlines on the LTA indicator when lane markers on the road
are not detected or the function is temporarily cancelled.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met again,
operation of the function is automatically restored. For example, LTA may not
function on the side(s) where white/yellow lines are not detectable.
Refer to the Toyota Owner's Manual for additional information on LTA operation,
settings adjustments, limitations, and precautions before attempting to use it.
DISABLING STEERING ASSIST
(1) Press " " switches and select
(2) Press " " switches and select the
(3) Press " " each time to change the setting.
(4) Press " " to go back to the menu.
Note: Operation of the LTA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
ADJUSTING LTA ALERT SENSITIVITY
The driver can adjust the sensitivity of the LTA (warning) function from the
Multi-Information Display (MID) customization screen.
High - Is designed to warn approximately before the front
tire crosses the lane marker.
Normal - Is designed to warn approximately when the front
tire crosses the lane marker.
(1) Press " " switches and select
(2) Press " " switches and select the
(3) Press " " each time to change the setting.
(4) Press " " to go back to the menu.
displays when the Multi-Information Display (MID) is switched
from the Multi-Information Display (MID).
setting function and then press "
from the Multi-Information Display (MID).
setting function and then press "
35
."
."