[Audio] Menu - LG HT156DD Owner's Manual

[AUDIO] Menu

Speaker Setup
Make the following settings for the built-in channel
surrounds decoder.
1. Press SETUP.
2. Use WS to select AUDIO menu and then press
D.
3. Use WS to select [Speaker setup] menu and
then press D.
4. Press ENTER.
The [Speaker setup] appears.
5. Use AD to select the desired speaker.
6. Adjust options using WSAD buttons.
7. Press RETURN to confi rm your selection. Return
to the previous menu.
HT156DD-F0-AMARLLK-ENG.indd 13 HT156DD-F0-AMARLLK-ENG.indd 13
[Speaker]
Select a speaker that you want to adjust.
,
Note
Certain speaker settings are prohibited by
the Dolby Digital licensing agreement.
[Size]
Since the speaker settings are fi xed, you cannot
change the settings.
[Volume]
Press AD to adjust the output level of the
selected speaker.
[Distance]
After you connected speakers to your unit,
set the Distance between the speakers and
your listening point if the distance of Center
or Rear speakers is bigger than the distance
of Front speakers. This allows the sound from
each speaker to reach the listener at the same
time. Press AD to adjust the Distance of the
selected speaker. This distance is equivalent to
a diff erence of the distance between Center or
Rear speaker and Front speakers.
[Test]
Press AD to test the signals of each speaker.
Adjust the volume to match the volume of test
signals memorized in the system.
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [On] for this eff ect.
Vocal
Set to [On] only when a multi-channel karaoke DVD
is playing. The karaoke channels on the disc mix
into normal stereo sound.
System Setting 13
11. 07. 28 11. 07. 28
3
9:13 9:13