Safety; Safety Instructions; General Hardware Information; Important Safety Warning - JBL VTX B18 User Manual

Table of Contents

2 - SAFETY

Before using a JBL VTX Series system, please review the following for important information on safety and protection of your investment.

Read these instructions

Keep these instructions

Heed all warnings

Follow all instructions

Do not expose the product to direct rain or sea spray

Clean only with a dry cloth

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat

Only use attachments / accessories specified by the manufacturer

Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used,

use caution when moving the cart / apparatus combination to avoid injury from tip-over

10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such

as liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped

11. Contact JBL Professional for advanced servicing issues

12. CAUTION - DO NOT PERFORM ANY SERVICING UNLESS YOU ARE QUALIFIED TO DO SO

13 . Prolonged exposure to excessive SPL can cause hearing damage: the loudspeaker is easily capable of generating sound pres-

sure levels (SPL) sufficient to cause permanent hearing damage to performers, production crew and audience members. Caution

should be taken to avoid prolonged exposure to SPL in excess of 90 dB

14. Read the System Rigging Manual before installation and use of the product

2.2 - GENERAL HARDW ARE INFORMA TION

Any hardware used in an overhead suspension application must be load rated for the intended use. Generally, this type of hardware is

available from rigging supply houses, industrial supply catalogs and specialized rigging distributors. Local hardware stores do not usu-

ally stock these products. Hardware that is intended for overhead suspension will comply with ASME B30.20 and will be manufactured

under product traceability controls. Compliant hardware will be referenced with a working load limit (WLL) and a traceability code.

2.3 - IMPORT ANT SAFETY W ARNING

The information in this section has been assembled from recognized engineering data and is intended for informational purposes only.

None of the information in this section should be used without first obtaining competent advice with respect to applicability to a given

circumstance. None of the information presented herein is intended as a representation or warranty on the part of JBL. Anyone making

use of this information assumes all liability arising from such use.

VTX B18 | User Manual

Table of Contents

Vtx series