Advertisement
Quick Links
Product End-of-Life Disassembly Instr uctions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
Compaq Presario CQ5000 PC Series
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
MB, PSU, Card reader, DDR, IO Card
All types including standard alkaline and lithium coin
or button style batteries (Battery on MB)
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
The QTY may vary from different PSU Models
Plastics of system and CPU fans
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
5
1
0
0
0
0
2
0
0
1
0
Page 1
Advertisement
Related Manuals for HP Compaq Presario CQ5000 PC Series
Summary of Contents for HP Compaq Presario CQ5000 PC Series
- Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
- Page 2 Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances 1.3 Markings for plastic parts greater than 25 grams Plastic Part ISO 11469:2000 Plastic Optional: Plastic Part Name Description Weight (grams) Part Mark Photo Mars2_MAIN_BEZEL_FRAME bezel frame Mars2_TRIM_BEZEL_BOTTOM bezel bottom...
- Page 3 1 Remove cover from the unit Rotate screw to open the access panel 2 Remove Front bezel 3 Take PCI & PCI-E cards off the PCA Use one hand to push the white plastic use the other hand to pull off the card EL-MF877-00 Page 3 Template Revision B...
- Page 4 4 Take off ODD Use one hand to pull the steel up , and the same time take off ODD use the other hand 5 Take off Cooler Press the steel button to loose Cooler fan 6 Take off Cooler Rotate screw driver to loose screw and then take the cooler off PCA EL-MF877-00...
- Page 5 7 Take off CMOS battery Pull the battery holder as shown in the photo, and then the battery will off the PCA 8 Take off PS from the Unit Use screw driver to loose screws and then take the PS off the Unit 9 cut off wire tie EL-MF877-00...
- Page 6 10 open PS 11 use screw driver to separate the small PCA from the main board 12 Screw driver T15 screw driver. EL-MF877-00 Page 6 Template Revision B PSG instructions for this template are available at EL-MF877-01...