Items To Set - Sony S-Frame DPF-D82 Operating Instructions Manual

Items to set

Item Setting
Slideshow Refer to "Enjoying a slideshow" (page 29).
Settings
Alarm Setting Sets the specific time for an alarm. (.page 43)
Auto power Sets the timer function which turns the power supply of the photo frame on or off,
ON/OFF automatically. You can use this function with the following settings. (.page 42)
Simple
Advanced*
Setup method
Date/time Sets the date, time, first day of a week, etc. (.page 20)
settings
General Listing Order
Settings
Auto display
orientation
LCD backlight
Beep
Image file size
Sony logo ON/
OFF
GB
46
Description
Power-ON You can set [Power-ON timer] ([Enable] or [Disable]),
timer [Auto ON time] and [Auto ON day].
You can set the timer (hour/minute) for the power to
turn on automatically.
Power-OFF You can set [Power-OFF timer] ([Enable] or
timer [Disable]), [Auto OFF time] and [Auto OFF day].
You can set the timer (hour/minute) for the power to
turn off automatically.
OK Returns to the previous screen after confirming the
operation.
Cancel Returns to the previous screen after cancelling the
operation.
Reset all Deletes all the selected times.
Advanced* Sets the auto power ON/OFF function according to a
day of the week by one hour units.
Simple Sets the auto power ON/OFF function finely in one
minute increments.
Sets the display order of images. This setting affects the order in
[Slideshow Settings].
Number Order* Displays images in order of file name.
Shoot. Date Displays images in order of shooting date.
ON*/OFF: You can set the photo frame to automatically detect and rotate
the orientation of images.
Allows you to set the brightness of the backlight of the LCD screen to a
level from 1 to 10*.
ON*/OFF: Sets the beep sound on/off.
Album* Compresses images and saves them to the internal
memory.
Original Saves images to the internal memory without
compressing them. There is no deterioration, but you
can save fewer images.
ON*/OFF: You can set whether the photo frame's Sony logo lights or not.
*: Factory default settings