Sony S-Frame DPF-D100 Operating Instructions Manual page 37

Symptom Check item
Some images are • Does the mark displayed
not displayed.
• Were the images created
• Does the mark displayed
• Are there more than 9,999
• Did you rename the file with
• Are there eight or more
The file name is • Did you rename the file with
not displayed
properly.
below appear in the index
view?
with an application on a
computer?
below appear in the index
view?
images in the memory card?
a computer or other device?
levels in the folder hierarchy
of the memory card?
a computer or other device?
Cause/Solutions
c If the mark shown on the left is displayed,
the image file may not be supported by the
photo frame because, for example, it is a
JPEG file that was created with your
computer. Also, the image file may be
supported, but not contain the thumbnail
data. Select the mark and press
change the screen to the single image
display. If the mark on the left is displayed
again, the image cannot be displayed
because the image file is not supported by
the photo frame.
c If the mark shown on the left is displayed,
the image file is supported by the photo
frame, but the thumbnail data or image
itself cannot be opened. Select the mark
and press to change the screen to the
single image display. If the mark shown
on the left is displayed again, the image
cannot be displayed.
c The photo frame can play, save, delete, or
otherwise handle up to 9,999 image files.
c If you named or renamed the file on your
computer and the file name includes
characters other than alphanumeric
characters, the image may not be able to
be displayed on the photo frame.
c The photo frame cannot display images
saved in a folder that is over eight levels
deep.
c If you named or renamed the file on your
computer and the file name includes
characters other than alphanumeric
characters, the file name may not be able
to be displayed properly on the photo
frame. Also, for a file created on a
computer or other device, a maximum of
eight characters from the beginning of the
file name can be displayed.
Note
Only alphanumeric characters can be displayed.
to
Continued
GB
37