Multi Protective Function; Emptying The Water Container - Amcor SF8000E-V3 User Manual

MULTI PROTECTIVE FUNCTIONS
OVERFLOW PROTECTION FUNCTION
When the water in the internal water tank exceeds the warning level, the machine will automatically
sound an alarm, and the Tank full indicator will illuminate. At this point, the internal water tank will need
emptying. After the water is emptied, the machine will automatically return to the original state. If
vented correctly and the humidity level is normal, the self evaporative function will vastly reduce the
frequency the tank will need emptying.
AUTOMATIC DEFROSTING (COOLING MODELS HAVE THIS FUNCTION)
The machine has automatic defrosting function: during defrosting, heating symbol on the display
screen will flash.
PROTECTION FUNCTION OF THE COMPRESSOR
To increase the service life of the compressor, it has a 3-minute delay start protection function

EMPTYING THE WATER CONTAINER

MANUAL DRAINAGE:
When the internal water tank is full the unit will stop working.
Shut off the unit and unplug. Try not to move the model abruptly as
this may cause the water in the internal tank to spill out.
Place a tray under the water plug or place the unit in a drainage
area.
Unscrew the drain plug cap and remove the rubber stopper - water
will drain from the internal tank.
Put the rubber stopper back and screw the drain plug cap back into
place.
Note: This model has a self-evaporative function, which reduces the need to empty the water tank. If
the unit is vented correctly most of the water is reused to cool the condenser coils and any excess is
evaporated. Please do not use continuous drainage if you intend to use the self-evaporating facility.
CONTINUOUS DRAINAGE:
Unscrew the drain plug cap and remove the rubber stopper.
Connect a water pipe (Not supplied) to the water outlet.
You can plumb this pipe into your current plumbing system,
lead it outside and use gravity fall or use a water pump.
Page 11 of 15
Rubber Stopper
Drain Plug Cap