Bissell ProHeat 1699 User Manual page 17

Bissell homecare, inc user guide vacuum cleaner 1699, 7901, 8910 series
Hide thumbs Also See for ProHeat 1699:
Table of Contents

Advertisement

T
roubleshooting / User Maintenance (Continued)
Reduced spray or no spray. (Continued)
Possible Cause
6. The Pump Belt may be broken.
DirtLifter PowerBrush does not turn.
Possible Cause
1. The Brush Belt or Pump Belt
is off or broken.
Carpet Protector is not spraying. (Select Models Only)
Possible Cause
1. Cartridge not connected to the tool.
2. Solution clogging the Spray Trigger.
3. Applicator tool spray is blocked.
w w w . b i s s e l l . c o m
ug310-5868_1699_306.indd 17
ug310-5868_1699_306.indd 17
Lift Here
Insert
Screwdriver
Blade Here
Remedies
6. Turn the machine OFF (O) and unplug
from the outlet. To check if a Pump
Belt has broken, you will need a flat
head screwdriver. Insert the blade
end into the lower slot of the Belt
Access door to release the lower
snap. If necessary, insert the blade
end into the upper slot to release the
upper snap. Examine the belt for
breakage. You should be able to
see the Pump Belt looped around the
motor shaft. If it is broken or missing,
please refer to Replacement Parts on
page 19 before calling Consumer
Services. Complete installation
instructions will accompany the
replacement belt.
Remedies
1. Turn the machine OFF (O) and unplug
from the outlet. To check if the Brush
Belt or Pump Belt has broken, you
will need a flat head screwdriver.
Insert the blade end into the lower
slot of the Belt Access door to release
the lower snap. If necessary, insert
the blade end into the upper slot to
release the upper snap. Examine the
belt for breakage. If broken, please
refer to Replacement Parts on page 19
before calling Consumer Services.
Complete installation instructions
will accompany the replacement belt.
Remedies
1. Follow instructions on cartridge
assuring proper fit.
2. Soak applicator tool in hot water.
Spray without the cartridge attached to
purge any residual Solution left in the tool.
3. Soak applicator tool in hot
water. Spray without the cartridge
attached to purge any residual
Solution left in the tool.
8 0 0 . 2 3 7 . 7 6 9 1
3/1/06 3:14:04 PM
3/1/06 3:14:04 PM
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7901Proheat 8910Proheat 7901Proheat 1699 seriesProheat 7901 seriesProheat 8910 series

Table of Contents