Microphone Holder; Grip; Screw; L-Shaped Stereo Mini-Plug - Sony ECM MS957 Operating Instructions Manual

Electret condenser stereo microphone

5. Microphone Holder

You can also connect to a microphone stand (PF 1/2) (optional).

As shown in the illustration, it can be used as a handy microphone. Loosen the screw and

detach the grip from the microphone stand.

Tighten the screw after setting the direction of the microphone.

Connect to the MIC jack of your recording equipment (DAT, MD, NT, etc.)

9. Turning Capsule Button (See fig. D)

(a)

Set the turning capsule button according to the direction of the sound source. As

shown in the illustration, set the microphone head toward the sound source by pressing

the turning capsule button.

(b)

Using the microphone vertically This position makes a more accurate sound pick-

up. Use this position after monitoring and adjusting the sound quality of your recording

equipment.

(c)

Using the microphone horizontally This position makes for a successful sound pick-

up without any fine adjustments.

10. Microphone stand (See fig. E)

As shown in the illustration, spread out the legs to use the stand.