Sunrise Medical Quickie Q500 Series Instructions For Use Manual page 27

5. Mark where to cut the screws. (Fig. 7.10).
6. Remove the screws together with the spacer/spacers (Fig. 7.11).
7. Cut the screw where the mark is (Fig. 7.12).
It is very important that the fitter checks that the length of
the bolts are correct. If bolts are too short to reach through all
the threads - they will not have the strength to carry the loads
required. If bolts are too long the batteries or other wheel chair
components can be damaged. If necessary replace with longer
bolts, or shorten them.
8. Apply Loctite 222 (or an equivalent product) onto the screw
(Fig. 7.13).
Q500 M/F/R Rev.C
x5
x5
Fig. 7.10
Fig. 7.11
Fig. 7.12
Fig. 7.13
27