Sony 1080i Operating Instructions Manual page 36

Dubbing to another equipment
Notes
• If you output pictures in the playback pause mode
when connected with an i.LINK cable, recorded
images may appear grainy.
• When video signals in the HDV format is played
back, you cannot output pictures in the playback
pause mode or played back at various speeds other
than normal via the HDV/DV jack.
• When connected with an i.LINK cable, you cannot
output only pictures or sounds separately.
To video equipment without an i.LINK jack
When connecting this unit to a recorder without an
i.LINK jack, connect the two devices as shown below.
Set [COMPONENT] and [DOWN CONVERT] (p. 49)
corresponded to the signals you wish to output.
Recorder
Notes
• Refer also to the Notes on page 26.
• The audio output signal will comply with the setting
of [AUDIO MIX] of the [AUDIO SET] menu.
36
Chapter 3 Dubbing/Editing
Monitor
Audio input
Component video input
Video input
S-video input
Audio cable (Phono jack) (not supplied)
Component video cable (not supplied)
Video cable (not supplied)
S-video cable (not supplied)
Rear view of the player
(this unit)
: Signal flow