Fujitsu M255XK Customer Engineering Manual page 70

4.5.12 Door Lock Solenoid Replacement
Tools Required: . Phillips Screwdriver, M2
Phillips Screwdriver, M3
Refer to Figure 5-5.
1.
Remove the shield cover (item 44).
2. Open the front lever and remove the front lever assembly (paragraph 4.5.9).
3. Remove the front bezel (paragraph 4.5.8).
4. Remove the mounting screws and the door lock solenoid (item 39). Refer to
Figure 4-27.
5. Install a new door lock solenoid by reversing the removal procedure.
Clamp cam assembly
Lock lever assembly
tfount screw
Figure 4-27 Door Lock Solenoid
4-38
TS-021-013087 ••• 01