Troubleshooting The Mouse And Touch Pad - Sony VAIO PCG-GRZ530 Quick Start Manual

VAIO® Computer Quick Start
❑
If the display mode is set to external display (such as TV), press and hold the
Fn key while you press F7 several times.

Troubleshooting the Mouse and Touch Pad

Why doesn't the mouse work properly?
❑
If you are using a Sony USB mouse, make sure the mouse is securely
plugged into the USB port.
❑
If you are using an external mouse, make sure the mouse is securely plugged
into the mouse connector.
❑
If you are still experiencing problems, use your supplied Application
Recovery CD to reinstall the mouse drivers. See "Using the Application
Recovery CD(s)" on page 40 for more information.
Why doesn't the touch pad work properly?
❑
You may have disabled the touch pad without connecting a mouse to the
computer. To enable the touch pad:
1 Press the Windows key
select All Programs.
2 Press Enter.
3 Press the Down Arrow
press Enter.
4 Select Sony Notebook Setup again, and press Enter.
5 Press the Right Arrow key
6 Press the Tab key to select the left panel, and then press the Down
Arrow key
7 Press Alt+S simultaneously. The Mouse Properties dialog box appears.
8 Make sure the Buttons tab is selected, and press the Up Arrow key
and Down Arrow key
Tab key to move between shortcut menus.
9 Press Enter to save your changes and close the dialog box.
❑
Restart the computer to activate the touchpad again.
54
, and then press the Up Arrow
key to select Sony Notebook Setup, and
to select the Device tab.
to select Pointing Device.
to change the button assignments. Press the
key to