Instructions For Mounting The Base Unit - Mitsubishi Electric MELSEC-Q Series User Manual

4.1.2

Instructions for mounting the base unit

(1) Mounting dimensions
Mounting dimensions of each base unit are as follows:
QA1S33B
W 255(10.04)
Ws *1 235(9.25)
H
Hs *1
(2) Unit mounting position
5mm (0.20inches)
or more *2
*1 For wiring duct height of 50mm(1.97inches) or less. 40mm(1.57inches) or more for other
cases.
*2 20mm(0.79inches) or more when the extension cable is connected without removal of the
adjacent module.
*3 80mm(3.15inches) or more for the connector type.
Ws
W
QA1S35B QA1S38B
325(12.80) 430(16.93)
305(12.01) 410(16.14)
*1 The tolerances of Ws and Hs are ±0.3 mm, respectively.
This shows the position of the panel's ceiling,
wiring duct, or components.
5mm (0.20inches)
or more
QA1S51B
100(3.94)
80(3.15)
130(5.12)
110(4.33)
30mm
(1.18inches)
or more *1
Panel
30mm
(1.18inches)
or more
31
QA1S65B QA1S68B
315(12.40) 420(16.54)
295(11.61) 400(15.75)
Unit: mm (inches)
Programmable
controller
20mm
(0.79inches)
or more
*3
Door