Using A Second Battery Pack - Sony PCG-F340 Primary User Manual

Using a Second Battery Pack

You can purchase a second rechargeable battery pack. With two battery
packs, you can extend the time that you use your computer with battery
power. When using two battery packs, the battery pack you insert first
charges first. The battery pack you insert second charges when the first
battery pack is 85 percent full. You can monitor which battery pack is
charging by observing the battery indicator lights.
To insert a second battery pack
1
If another device is in the drive bay, remove the device. See "To
remove the floppy disk drive" on page 24.
2
Insert the battery pack into the drive bay.
If the battery is being used, the battery 2 indicator light turns on.
3
Attach the weight saver to the computer to stabilize the battery pack.
There is a RELEASE lever on the bottom of the weight saver. Slide the
lever toward the front of the computer to lock the weight saver. See
also "Using the Weight Saver" on page 37.
Using a Second Battery Pack
Drive bay
Battery pack
Label side facing down
Battery pack
Weight saver
35