Sony SRSDZ10 Operating Instructions Manual page 17

2
Fasten the screws to the wall.
The screws should protrude 5 to 7 mm (7/32 to 9/32 inch).
5 to 7 mm
7 9
( / to
32
3
Hang the speakers on the screws.
Note
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where
reinforcement is applied.
• Contact a screw shop or installer regarding the wall material or screws to be used.
• Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
/ inch)
32
4.6 mm
3
( / inch)
16
10 mm
13
( / inch)
32
Hole on the back of
the speaker
17
GB