Sony LBT-DR4 Operating Instructions Manual page 6

Step 2: Hooking up the system
(continued)
2
Connect the FM/AM antennas.
Set up the AM loop antenna, then
connect it.
Except for European models
AM loop antenna
For European models
AM loop antenna
6
Extend the FM wire
antenna horizontally.
Extend the FM wire
antenna horizontally.
3
If your system has a VOLTAGE
SELECTOR on the rear panel, set it
to the position of your local power
line voltage.
VOLTAGE SELECTOR
4
Connect the power cord to a wall
outlet.
The demonstration appears in the
display.
If the supplied adapter on the plug does
not fit your wall outlet, detach it from
the plug (only for models equipped with
an adapter).
5
Deactivate the demonstration mode
by pressing DISPLAY (for LBT-
W5000/W300/XB700/XB500 only)
or DEMO (STANDBY) (for other
C O
A X I
A L
F M
7 5 models) while the system is off.
To connect optional AV
components
See page 41.
-