Table of Contents
Advertisement
Video Resolution Down-scaling
The product supports video resolution down-scaling, the 4K input can be automatically
downgraded to 1080P output for compatibility with 1080P display, shown below .
#
Resolution
1
3840x2160
2
3840x2160
3
3840x2160
4
3840x2160
5
3840x2160
6
3840x2160
7
3840x2160
8
3840x2160
9
3840x2160
Firmware Upgrade
Please follow the below steps to upgrade firmware by the Micro-USB port:
1) Connect the splitter to the PC with USB cable.
2) Power on the splitter, and then the PC will automatically detect a U-disk named of
"BOOTDISK".
3) Double-click to open the U-disk, a file named of "READY.TXT" will be showed.
4) Copy the latest upgrade file (.bin) to the "BOOTDISK" U-disk directly.
5) If the filename "READY.TXT" automatically turns to "SUCCESS.TXT", the firmware
was upgraded successfully. If the firmware upgrade failed, please check the file
(.bin) and then follow the above procedure to operate again.
6) Remove the USB cable after firmware upgrade.
Input
Color
Refresh
Space
60
4:4:4
30
4:4:4
24
4:4:4
60
4:2:0
30
4:2:0
24
4:2:0
60
4:2:2
30
4:2:2
24
4:2:2
Downscale
Support
Support
Support
Support
Support
Support
Not Support
Not Support
Not Support
6
Output
1080P Specs
1080P@60Hz 4:4:4
1080P@30Hz 4:4:4
1080P@24Hz 4:4:4
1080P@60Hz 4:2:0
1080P@30Hz 4:2:0
1080P@24Hz 4:2:0
N/A
N/A
N/A
Advertisement
Table of Contents
