Sony DAV-DZ300 Operating Instructions Manual page 22

P /C ). If your TV accepts progressive format signals, you must use this connection and set the output
R R
channel of the system to progressive format (page 22).
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen.
To change the aspect ratio, see page 76.
Does your TV accept progressive signals?
Progressive is the method for displaying TV images which reduces flickering, and sharpens the image.
To display using this method, you need to connect to a TV that accepts progressive signals.
"P AUTO" or "P VIDEO" appears in the front panel display when the system outputs progressive
signals.
1
Press FUNCTION repeatedly to select "DVD."
2
Press PROGRESSIVE.
Each time you press PROGRESSIVE, the display changes as follows:
t
P AUTO (PROGRESSIVE AUTO)
r
P VIDEO (PROGRESSIVE VIDEO)
r
INTERLACE
x P AUTO (PROGRESSIVE AUTO)
Select this setting when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT VIDEO OUT jacks.
Normally select this under the above condition. This automatically detects the software type, and
selects the appropriate conversion method.
Note that the picture will not be clear or no picture will appear if you select these settings when
either of the above conditions is not met.
22
GB
PROGRESSIVE
Green
Blue
Red
FUNCTION