Settings For The Speakers - Sony Bravia Theater DAVHDZ273 Operating Instructions Manual

Sony dvd home theatre system operating instructions
Hide thumbs Also See for Bravia Theater DAVHDZ273:
Table of Contents

Advertisement

x [PARENTAL CONTROL]
You can set the playback restrictions. For
details, see "Restricting Playback of the Disc"
(page 43).
x [MULTI-DISC RESUME] (DVD VIDEO/
VIDEO CD only)
You can set the [MULTI-DISC RESUME]
function to on/off.
[ON]: The system stores the resume points in
memory for up to 10 discs.
[OFF]: The system does not store the resume
points in memory. Playback restarts at the
resume point only for the current disc in the unit.
x [RESET]
You can return the [SET UP] settings other than
[PARENTAL CONTROL] to the default
settings. For details, see "Returning the
[SETUP] settings to the default" (page 66).

Settings for the speakers

[SPEAKER SETUP]
To obtain the best possible surround sound, set
connection of the speakers and their distance
from your listening position. Then use the test
tone to adjust the level and the balance of the
speakers to the same level.
Note
• You cannot operate [SPEAKER SETUP] when you
connect headphones to the unit.
SPEAKER SETUP
CONNECTION:
DISTANCE(FRONT):
DISTANCE(SURROUND):
LEVEL(FRONT):
LEVEL(SURROUND):
TEST TONE
x [CONNECTION]
If you do not connect center or surround
speakers, set the parameters for [CENTER] and
[SURROUND]. Since the front speaker and
50
US
FRONT:
CENTER:
SURROUND:
SUBWOOFER:
subwoofer setting is fixed, you cannot change
them.
[FRONT]
[YES]
[CENTER]
[YES]: Normally select this.
[NONE]: Select this if no center speaker is used.
[SURROUND]
[YES]: Normally select this.
[NONE]: Select this if no surround speaker is
used.
[SUBWOOFER]
[YES]
Note
• When you change the [CONNECTION] setting, the
[STANDARD] of [SPEAKER FORMATION]
setting remains the same, but the other settings of
[SPEAKER FORMATION] return to
[STANDARD].
x [DISTANCE (FRONT)]
When you move the front speakers and center
speaker, be sure to set the parameters of the
distance (A) from the listening position to the
speakers.
You can set the parameters from 1.0 to 7.0
1)
meters
(3 to 23 ft) for the front speakers, from
0.0 to 7.0 meters
speaker.
YES
YES
YES
YES
[L/R] 3.0 m/10 ft
distance.
[CENTER] 3.0 m/10 ft
distance (up to 1.5 meters (5 ft) closer to the
front speakers).
2)
(0 to 23 ft) for the center
A
3)
: Set the front speaker
3)4)
: Set the center speaker

Advertisement

Table of Contents
loading

Table of Contents