Standard Repair Process Detail Technical Manual
symptom
Signage Monitor
Content
<ALL MODELS>
Entry method
Entry method
1. Press the ADJ button on the remote controller for adjustment.
1. Press the ADJ button on the remote controller for adjustment.
2. Enter into White Balance of item 6.
2. Enter into White Balance of item 10.
3. After recording the R, G, B (GAIN, Cut) value of Color Temp (Cool/Medium/Warm), re-
3. After recording the R, G, B (GAIN, Cut) value of Color Temp (Cool/Medium/Warm), re-
Copyright ⓒ 2015 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Error
A. Video error_No video/Normal audio
Check White Balance value
enter the value after replacing the MAIN BOARD.
enter the value after replacing the MAIN BOARD.
Established
date
Revised
date
A3
2014. 06 .10
A3
LGE Internal Use Only