Periodic maintenance and adjustment
NO.
ITEM
11 * Tires
12 * Wheel bearings
13 * Swingarm
7
14
Drive chain
15 * Steering bearings
16 * Chassis fasteners
Brake lever pivot
17
shaft
Brake pedal pivot
18
shaft
CHECK OR MAINTENANCE JOB
• Check tread depth and for dam-
age.
• Replace if necessary.
• Check air pressure.
• Correct if necessary.
• Check bearings for looseness or
damage.
• Check operation and for exces-
sive play.
• Lubricate with lithium-soap-
based grease.
• Check chain slack, alignment and
condition.
• Adjust and lubricate chain with a
special O-ring chain lubricant
thoroughly.
• Check bearing play and steering
for roughness.
• Lubricate with lithium-soap-
based grease.
• Make sure that all nuts, bolts and
screws are properly tightened.
• Lubricate with silicone grease.
• Lubricate with lithium-soap-
based grease.
ODOMETER READING (whichever comes first)
1000 km
4000 km
8000 km
or
or
or
2 months
6 months
10 months
√
√
√
√
√
√
Every 24000 km (14000 mi)
Every 1000 km (600 mi) and after washing the motorcycle, riding in the rain or
riding in wet areas
√
√
√
Every 24000 km (14000 mi)
√
√
√
√
√
√
7-5
ANNUAL
12000 km
16000 km
CHECK
or
or
14 months
18 months
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√