Rear View - D-Link ShareCenter DNS-343 Quick Install Manual

Hardware Overview
Drive Eject Levers
Reset Button
Power Receptacle
Drive Eject Levers
COMPONENT
Drive Eject Levers
Reset Button
Power Receptacle
USB Connector
Gigabit Ethernet Port Use the Gigabit Ethernet Port to connect the DNS-343 to the local
Cooling Fans
D-Link DNS-343 Quick Install Guide

Rear View

DESCRIPTION
Use the provided levers to eject the SATA hard drives.
Press this button for over 5 seconds to reset the unit to factory
defaults.
Connect the 19V / 7.89A power supply to the receptacle.
1x USB 2.0 (Type A) connector. USB Host port for Print Server or
USB UPS monitoring.
network.
The cooling fans are used to cool the hard drives and feature
speed control. When the unit is first powered on, the fans rotate
at a low speed and they will switch to a high speed when the
temperature rises above 49° C.
USB Connector
Cooling Fan
Ethernet Port
Cooling Fan
4