TANDBERG C90 System Integrator Manual page 18

Codec C90
Contents Introduction Getting Started
Contents Introduction Getting started
Rear panel sockets
overview
The TANDBERG Codec C90 offers a great flexibility
in connecting audio and video equipment to the
system.
The illustration below shows the rear panel of the
TANDBERG Codec C90.
Inputs Outputs TANDBERG Basic
Setup
The main connectors
for TANDBERG basic
1 1
setup are highlighted
in orange.
* For future use
Codec C90 Rear Panel
Video sockets
Video sockets
D14128.03—JULY 2009
Interfaces About the API
Interfaces Interfaces About the API
Video sockets
The video input sockets are:
4xHDMI
4xHD-SDI
2xDVI-I
2xAnalog Component (Y-Pr-Pb)
1xComposite or 1xS-Video(YC)
The video output sockets are:
2xHDMI
2xDVI-I
1 Composite
Audio sockets
Audio sockets
GPIO and USB
xConfiguration xConfiguration xCommand
xCommand xStatus
Audio sockets
The audio input sockets are:
8xXLR Female - Microphone/Line In
4xRCA - Line In (1 Left, 2 Right, 3 Left, 4 Right)
2xHDMI
The audio output sockets are:
2xXLR Male - Line Out
4xRCA - 1 Left (SPDIF), 2 Right, 3 Left (SPDIF),
4 Right
2xHDMI
The following pages gives a detailed description of the rear panel sockets and connectors.
System Integrator Guide
xStatus Cameras Appendices
Cameras Appendices
Other sockets
The other sockets are:
Ethernet 1 and Ethernet 2*
COM - Serial data port
Camera control - Serial port for camera control
Power socket
Grounding - Chassis grounding
Power On/Off switch
GPIO*, USB Host*, USB Device*, T Link*
T Link Network COM Port,
interface Camera
sockets Control
Contact us
Contact us
Power Power
socket switch
18