Pioneer PDP-503CMX Product Training Manual page 69

Adjustments and settings in integrator mode
For detailed information, see 5.4.2, "Example of integrator mode operation."
Adjusting PICTURE (picture quality)
The items that can be adjusted here are CONTRAST, BRIGHT, COLOR, TINT, H.ENHANCE, V.ENHANCE, H.SHARP
and V. SHARP. These differ somewhat from the items that can be adjusted in menu mode (see the instruction manual).
1 Enter integrator mode and switch to the input (INPUT 1~5)
you want to adjust.
The set ID will be displayed on the upper right where the
"– –" mark is.
Select PICTURE and the item to adjust.
When DEFAULT is selected on screen 1, all adjustment
values for PICTURE will be restored to the factory preset
values.
2 Make the necessary adjustments.
(NOTE) When in INPUT 1, 2 or 5 during personal computer
signal input, COLOR, TINT, H. SHARP and V.
SHARP cannot be adjusted.
During video signal input, H.ENHANCE and
V.ENHANCE cannot be adjusted.
Make adjustments using the 2 and 3 buttons on the remote
control or the main unit's operating panel.
The values adjusted here will be the initial values for
adjustment in menu mode.
In addition, if SHARP is adjusted in menu mode, the amount
of that adjustment will be added to both the H. SHARP and
V. SHARP adjustment values in integrator mode.
Press the SET button to return to screen 2.
<Adjustable range> 0 to 255 for CONTRAST, BRIGHT, COLOR and TINT
0 to 15 for H.ENHANCE, V.ENHANCE, H.SHARP
Screen 1
Personal computer signal input
I NTEGRATOR MENU
PICTURE WHITE BAL
C O N T R S T A : 1 2 8
B R I G H T : 1 2 8
]
H E . N H A NC E : 0
V E N AN . H C E : 0
D E AU L T F
SELECT SET
Video signal input #
I NTEGRATOR MENU
PICTURE WHITE BAL
C O N T R S T A : 1 2 8
B R I G H T : 1 2 8
C O L O R : 1 2 8
T I N T : 1 2 8
H S . H A R P : 8
V S H RP . A : 8
D E AU L T F
SELECT SET
Screen 2
]
H. E N H N
SELECT
# #
and V.SHARP
Integrator Mode
I NPUT 1
– –
SCREEN SET UP OPTION
ENTER MENU EXIT
I NPUT 1
– –
SCREEN SET UP OPTION
ENTER MENU EXIT
A CE : 0
EXIT
MENU
ADJUST
SET
SET
.
69