Sony WEGA KLV-23HR3 Operating Instructions Manual page 29

Connecting a VCR
To connect a VCR, please refer to the section "Connecting the aerial and VCR" of this instruction manual on page 14.
Connecting a VCR or a DVD recorder that supports SmartLink
SmartLink is a direct link between the TV set and a SmartLink compatible VCR/DVD recorder. For more
information on SmartLink, please refer to the instruction manual of your SmartLink VCR/DVD recorder.
If you use a VCR or a DVD recorder that supports SmartLink, please connect the VCR or the DVD recorder to the
TV using a Scart lead to the Scart
If you have connected a decoder or a Set Top Box to the Scart
VCR connected to this Scart
Select the "Manual Programme Preset" option in the "Set Up" menu and after entering in the "Decoder**" option,
select "On" (refer to page 26). Repeat this option for each scrambled signal.
**This option is only available depending on the country you have selected in the "Country" menu.
Connecting Audio Equipment to the TV
To listen to the sound from TV on Hi-fi equipment.
Connect your audio equipment to the audio output sockets E if you wish to amplify the audio output from the TV.
Next, using the menu system, select the "Features" menu and set the "TV Speakers" to "Permanent Off" (see page
22).
The volume of the external speakers can be altered by pressing the volume buttons on the TV remote control.
The treble and bass setting can also be altered through the "Sound Adjustment" menu (see page 20).
30
Additional Information
2/
F.
S
2/ F or through a
S