Sony Bravia KDL40W2000 Operating Instructions Manual page 5

2: Attaching the stand
1
Stand
2
Packaging material
Packaging material
3
90°
4
1
Take out the stand, screws, and packaging
material to begin stand setup.
2
Set the packaging material as shown.
3
Place the TV directly to the stand as
shown.
After placing the TV on the stand, remove the
packaging material.
4
Fix the TV to the stand using the supplied
screws.
Notes
• This TV is very heavy, so two or more people should place
the TV on the stand.
• If using an electric screwdriver, set the tightening torque
at approximately 1.5 N·m (15 kgf·cm).
5
GB