Using The Screen Settings - Sony KDL-26S2000, KDL-32S2000, KDL-40S2000 Operating Instructions Manual

Using the Screen Settings

Screen
Target Inputs Current Input
Wide Mode Normal
Auto Wide On
4:3 Default Normal
Display Area Normal
Horizonal Center 0
Vertical Center
Vertical Size
A A
D D
Select: Set: Back: Exit:
RETURN
Option
Target Inputs
Wide Mode
Auto Wide
4:3 Default
Select the default Screen
Mode to use for 4:3
sources
Display Area
MENU
Description
Determines whether to apply Screen menu settings to all inputs, or only to the input you are
currently watching.
All Inputs
Applies settings to all inputs.
Current Input Applies settings to the current input.
Wide Zoom
Select to fill screen with minimum distortion.
Normal Select to display 4:3 picture in original size when the original source is
4:3.
Normal is not available when you are watching 720p or 1080i sources.
Full
Select to enlarge the picture horizontally to fill the screen when the
original source is 4:3 (Standard definition source). When the original
source is 16:9 (High definition source), select this mode to display 16:9
picture in original size.
Zoom Select to enlarge the original picture without distorting the aspect ratio.
On
Select to have the screen automatically change to the screen mode that
is best for the current program. If frequent screen changes are disturbing
to you, select Off.
Off Select to turn off the Auto Wide option. Choose a screen mode from the
Wide Mode option.
Wide Zoom Select to enlarge the 4:3 picture to fill the 16:9 screen, keeping the
original image as much as possible.
Normal Select to display the 4:3 picture in its original size.
Off Select to continue using the current Wide Mode setting when the
channel or input is changed.
If 4:3 Default is set to anything but Off, the Wide Mode setting changes only for
the current channel. When you change channels (or inputs), Wide Mode is
automatically replaced with the 4:3 Default setting for 4:3 sources. To retain the
current Wide Mode setting as channels and inputs are changed, set 4:3 Default
to Off.
Select Normal to return to the default display area. Select -1 or -2 to enlarge the picture so
that the edges are outside the visible portion of the screen.
Introducing MENU Function
(Continued)
27