Connecting The Tv; Cable System And/Or Vhf/Uhf; Hd Cable Box/Hd Satellite Box - Sony KDL-26M3000, KDL-26ML130, KDL-32M3000, KDL-32ML130, KDL-37M3000 Operating Instructions Manual

3. Connecting the TV

Cable system and/or VHF/UHF

Cable or VHF/UHF (or VHF only)
75-ohm coaxial cable
(not supplied)
• It is strongly recommended that you connect the
antenna/cable input using a 75-ohm coaxial cable (not
supplied) to receive optimum picture quality. A
300-ohm twin lead cable can be easily affected by radio
frequency interference, resulting in signal degradation.
Cable and VHF/UHF (or VHF only)
If you want to watch both cable and antenna (over-
the-air) programming, you will need to use an
optional A-B RF Switch (not supplied) to switch
between the cable and over-the air antenna
programming, as shown.
A-B RF
Switch
Cable
Antenna
• Be sure to set Cable setting to Cable On or Cable
Off in Channel menu for the type of input signal you
choose (see page 30 for more details.).
16
Rear of TV
VHF/UHF/
CABLE input
Rear of TV
VHF/UHF/CABLE input

HD Cable Box/HD Satellite Box

You can also enjoy high definition programming by
subscribing to high definition cable service or high
definition satellite service. For the best possible
picture, connect these components to your TV via the
HDMI or component video (with audio) input on the
back of your TV.
Shown with HDMI Connection
VIDEO IN
1
S VIDEO
VIDEO
L
(MONO)
AUDIO
R
HDMI cable
HD cable box/
HD satellite box
Rear of TV
IN PC IN
1
RGB
SERVICE
ONLY
2
R-AUDIO-L
AUDIO
COMPONENT IN
(1080i/720p/480p/480i)
2
1
3
Y
DIGITAL
AUDIO OUT
(COAXIAL)
P
B
P
R AUDIO OUT
(FIX)
L
AUDIO
R
CATV/Satellite
antenna cable