Sony Bravia KDL-W40A12U Operating Instructions Manual page 42

General
Problem
The TV turns off automatically
(the TV enters standby mode)
Some input sources cannot be
selected
The remote does not function
The 1 (standby) indicator
flashes
42
Cause/Remedy
• Check if the Sleep Timer function is activated (page 28).
• Check if the Auto Shutoff is activated (page 28).
• If no signal is received or no operation is performed in the TV mode for 10
minutes, the TV automatically switches to standby mode.
• Select "AV Preset" in the "Set Up" menu and cancel "Skip" of the input
source (page 30).
• Check that the remote is set correctly for the equipment you are using.
• If the remote does not operate the equipment even when the remote has been
set correctly to the equipment, enter the necessary code set as explained in
"Programming the remote" (page 37).
• Replace the batteries.
• Digital programme is set for "Timer REC". For details, see "Checking the
Digital Electronic Programme Guide (EPG)" on page 16.