Basic Operations
24
Button
Description
ws PICTURE
Press repeatedly to cycle through the available picture modes:
Vivid, Standard, Custom. The picture modes can be also
accessed in the Picture settings. For details, see
Settings" on page 33.
wd WIDE
Press repeatedly to step through the Wide Mode settings:
Wide Zoom, Normal, Full, Zoom. The Wide Mode settings
can be also accessed in the Screen settings. See page 37.
Changing the Wide Screen Mode
4:3 Original source
Standard definition source
Wide Zoom
Normal
Full
Zoom
wf DISPLAY
Press once to display the current channel number, channel
label, program-related information (if available), time, Wide
Mode settings and remaining sleep time (when Sleep is set,
see page 44). The OSD (on screen display) will turn off
automatically in a few seconds, or you can press DISPLAY
again to turn it off immediately.
Press V/v/B/b to move the on-screen cursor. Press
wg
V/v/B/b
select/confirm an item.
wh TOOLS
Press to display the Tools menu that is associated with your
current input: Picture Mode, Sound Mode, Wide Mode,
Add to Favorites, Caption Vision (CC) and Alternate
Audio. (See pages 33, 35, 36, 37, 39 and 43.)
✍
wj MENU
Press to display the MENU with TV functions and settings.
See "Overview of MENU" on page 31.
wk CH +/–
Press to scan through channels. To scan quickly through
channels, press and hold down either +/–.
wl F1/F2
Press to select the function of connected components. For
details, see "Using Other Equipment with Your Remote
Control" on page 27.
m
The menus you can select may vary depending on
the input signal.
"
Picture
16:9 Original source
High definition source
m
Wide Zoom
Normal
Full
Zoom
to