Securing The Tv - Sony BRAVIA KDL-37XBR6 Operating Instructions Manual

Lcd digital color tv
Hide thumbs Also See for BRAVIA KDL-37XBR6:
Table of Contents

Advertisement

///_
Sony strongly recommends taking
measures to prevent the TV from toppling
over. Unsecured TVs may topple and
result in property damage, serious bodily
injury or even death.
Prevent the TV from Toppling Over
[]
Secure tile TV to a wail and/or stand.
[]
[]
[]
[]
[]
Do not allow children
to play or climb on
furniture
and TV sets.
Avoid placing or hanging items on the TV.
Never install the TV on:
• slippery, unstable and/or uneven surfaces.
• furniture that can easily be used as steps,
such as a chest of drawers.
Install the TV where it cannot be pulled,
pushed, or knocked over.
Route all AC power cords and connecting
cables so that they are not accessible to
curious children.
Use a Sony TV Stand
Use a Sony specified
TV stand (see page 2) and
follow the instruction
manual provided
with the
Sony TV stand.
If a Sony specified TV stand is not used, consider
the following recommended measures.
Recommended
Measures to Secure the TV
Secure
the Stand
for the TV
Make sure the TV stand can adequately
support
the weight of the TV. Use two angle braces (not
supplied)
to secure the stand.
For each angle brace use the appropriate
hardware
to:
• attach one side of the angle brace to the wall stud.
• attach the other side to the TV stand.
Angle brace
Stand
Secure
the TV to the Stand
Use the optional
hardware
listed below (not
supplied):
• M6 x 12-18 mm anchor bolt (screwed
into the
TV's Table-Top
Stand)
• A screw or similar
(attach it to the TV stand)
• Rope or chain (strong enough to support the
weight of the TV). Make sure that there is no
excess slack in the rope or chain.
An alternative
way to secure the TV is with an
optional
Sony Support
Belt Kit.
Screw hole on the
Table-Top Stand
Contact Sony Customer Support to obtain the optional
Support Belt Kit by providing your TV model name.
• For United States call: 1-800-488-7669 or visit:
www.sony.com/accessories
• For Canada call: 1-877-899-7669
Anchor
the TV to the Wall
Use the hardware
listed below (not supplied):
• Two M6 x 12-18 mm anchor bolts (screw into
the top-most
wall-mount
holes located on the
rear of the TV)
• Rope or chain (attach to one M6 anchor bolt)
• Wall-anchor
(attach to the wall stud) strong
enough
to support the weight of the TV (pass
the rope through the wall-anchor,
then attach
to the other M6 anchor bolt)
Anchor bolts
Wall-mount .....
_°""°-RhPe°r
holes
_-_
-
Wall-
anchor
• Securing the TV to the stand without securing it and
the stand to the wall provides minimum protection
against the TV toppling over. For further protection,
follow all three measures recommended above.
9
if}

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents