Troubleshooting Guide - Binatone ACTION 950 User Manual

11. Troubleshooting Guide

Symptom
No power.
Reception
is weak.
Cannot change
CTCSS sub-
channels.
Range is limited.
Sound distortion
problems.
No
communication
BINATONE TELECOM PLC
1 Apsley Way London NW2 7HF,United Kingdom.
Tel: +44(0) 20 8955 2700 Fax: +44(0) 20 8344 8877
e-mail: binatoneuk@binatonetelecom.co.u
________________________________________
We the manufacturer / Importer :
Declare under our sole responsibility that the following product
Type of equipment:
Model Name:
Country of Origin:
Brand:
complies with the essential protection requirements of R&TTE Directive 1999/5/EC on the
approximation of the laws of the Council Directive 2004/108/EC on the approximation of
the laws of the Member States relating to electromagnetic compatibility (EMC) and the
European Community Directive 2006/95/EC relating to Electrical Safety.
Assessment of compliance of the product with the requirements relating to the essential
requirements according to Article 3 R&TTE was based on Annex III of the Directive
1999/5/EC and the following standard:
EMC:
EN 301 489 -5 V1.3.1:(2002-08)
EN 301 489 -1 V1.6.1:(2005-09)
EN 300 296 -2 V1.1.1:(2001-03)
Electrical Safety:
EN 60065-1:2006
The product is labelled with the European Approval Marking CE as show. Any Unauthorized
modification of the product voids this Declaration.
Manufacturer / Importer
(signature of authorized person)
Signature:
Solution
Check if the batteries are installed properly.
The battery may be weak.
Replace the old batteries with new ones.
Turn the
PWR/VOL
The receiving signal may be weak and/or out of range.
If this happens, press the
time to activate the Monitor function.
Key lock mode must be deactivated if the Key lock icon (
displayed on the LCD Screen.
To change CTCSS sub-channels, press the
CTCSS sub-channel number flashes on the LCD Screen.
Press the UP or DOWN
Batteries may be weak.
Batteries may be weak.
Replace with new batteries
See the "Effective Range" diagram.
The maximum range will vary depending on terrain and environment.
Open fields provide the maximum range, while steel/concrete
structures, heavy foliage, and use in buildings and in vehicles may
limit the range significantly.
Wearing the radio close to the body, such as in a pocket or on a
belt, will decrease range; change the location of the radio.
If you are transmitting, speak in a normal tone of voice, 5 cm
away from the MIC (microphone.).
If you are receiving, lower the volume to a comfortable level.
Radios too close. Radios must be at least 2 metres apart; increase
your distance.
Radios too far apart. Obstacles interfere with transmission. Talk
range is up to 10kms in clear unobstructed conditions.
Check the Channel and the CTCSS code setting. Both the
Transmitting and Receiving PM R units should be tuned to
the same Channel and CTCSS code (if applicable).
k
.
EC Declaration of Conformity
Binatone Telecom Plc
1 Apsley Way London
NW2 7HF, United Kingdom.
Private Mobile Radio
Action 950 Series
China
Binatone
London,
Place & Date: 8th Nov, 2008
button to increase the receiver volume level.
MENU and DOWN buttons at the same
MENU button twice, the
button to change the CTCSS sub-channel.
if the charge level indicator gets low.
Waste electrical products must not be
disposed of with household waste.
This equipment should be taken to
your local recycling centre for safe
treatment.
UK(BTP) Ver 3 Aug 09
) is