Detaching The Table-Top Stand From The Tv - Sony BRAVIA 4-178-827-15(1) Setup Manual

Detaching the Table-Top
Stand from the TV
Remove only the screws marked with
the TV.
~
• KDL-32EX710/32EX700 models must remove
the stand rear cover prior to detaching the Table-
Top Stand.
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
• When installing the TV on a wall, remove the four
screws from the rear of the TV. (They are fastened
in the screw holes for wall mounting.) Be sure to
store the removed screws in a safe place, keeping
them away from children.
• When attaching the Table-Top Stand again, be
sure to fasten the four screws (previously
removed) to the original holes on the rear of the
TV.
• Do not hold by the Stand Rear Cover while
carrying the Table-Top Stand to prevent dropping
the stand which may cause an injury or damage to
the property.
12
on