Viewing Pictures From Connected Equipment - Sony BRAVIA 4-168-148-E5(1) Operating Instructions Manual

Viewing pictures from
connected equipment
Turn on the connected equipment, then
perform one of the following operation.
For an auto-tuned VCR page 7
In analogue mode, press PROG +/–, or the number
buttons, to select the video channel.
For other connected equipment
Press to display the connected equipment list.
Press / to select the desired input source, then
F f
press . (The highlighted item is selected if two
seconds pass without any operation after pressing
.)
f
For a USB device
See page 21.
Symbol on the Description
screen
Component To see the equipment connected to
A.
HDMI1, HDMI IN 1, HDMI IN 2, HDMI IN
HDMI2, 3 or HDMI IN 4
HDMI3 or To see the equipment connected to
HDMI4 B, C, D or L.
Digital video and audio signals are
input from the connected equipment.
If the equipment has a DVI socket,
connect the DVI socket to the
HDMI IN 1 socket through a DVI-
HDMI adaptor interface (not
supplied), and connect the
equipment's audio out sockets to the
audio in sockets in the HDMI IN 1
sockets.
Connect to the HDMI IN 2 socket,
to view photographs or screen
images from a PC or digital video
camera.
AV1 To see the equipment connected to
E.
20
GB
Symbol on the
screen
AV2
PC
USB
/
F
AV3
~
• Be sure to use only an authorised HDMI cable bearing
the HDMI logo. We recommend that you use a Sony
HDMI cable.
• When HDMI control compatible equipment is
connected, communication with the connected
equipment is supported. Refer to page 22 to set up this
communication.
To connect
Conditional
Access Module
(CAM) J
Hi-Fi audio
equipment G
DIGITAL
AUDIO OUT
(OPTICAL) I
Headphones
N
Description
To see the equipment connected to
F.
To see the equipment connected to
H.
z
• It is recommended to use a PC cable
with ferrites like the "Connector, D-
sub 15" (ref. 1-793-504-11,
available in Sony Service Centre), or
equivalent.
To see the equipment connected to
K.
You can enjoy photo/music/video
files stored in a Sony digital still
camera or camcorder (
page 21
To see the equipment connected to
M.
When connecting mono equipment,
connect to the AV3 L socket.
Do this
To use Pay Per View services.
For details, refer to the instruction
manual supplied with your CAM.
Turn off the TV when inserting or
removing your CAM.
~
• CAM is not supported in some
countries/regions. Check with your
authorised dealer.
Connect to the audio output sockets
to listen to the sound from the
TV on Hi-Fi audio equipment.
Audio level of the external speakers
can be modified by pressing the
volume buttons on the remote control.
Use an optical audio cable.
Connect to the i socket to listen to
sound from the TV on headphones.
).