Sony BRAVIA 3-298-243-13(1) Operating Instructions Manual page 25

Film Mode
Video/Photo
x.v.Colour
(except for
KDL-32W4xxx,
KDL-32E4xxx,
KDL-26E4xxx,
KDL-37V4xxx,
KDL-32V4xxx,
KDL-26V4xxx)
Photo Colour Space
(except for
KDL-32W4xxx,
KDL-32E4xxx,
KDL-26E4xxx,
KDL-37V4xxx,
KDL-32V4xxx,
KDL-26V4xxx)
Timer Settings
Provides an improved picture quality which is optimized for film when playing
DVD images taken on film and non progressive (interlaced).
"Auto": Detects the picture contents (video or film) and optimizes the picture
quality. Use this setting for standard use.
"Off": Turns off the "Film Mode" feature.
~
• If the image contains irregular signals or too much noise, "Film Mode" will be
automatically turned off even if "Auto" is selected.
• "Film Mode" is not available when "Video/ Photo" is set to "Photo" or when
photograph is detected if "Video-A" is set.
Provides suitable image quality by selecting the option depending on the input
source (video or photograph data).
"Video-A": Sets suitable image quality, depending on the input source, video
data or photograph data when directly connecting Sony HDMI output-capable
equipment that supports "Video-A" mode.
"Video": Produces suitable image quality for moving pictures.
"Photo": Produces suitable image quality for still images.
~
• The setting is fixed to "Video" when Video-A mode is not supported on the
connected equipment, even if "Video-A" is selected.
• Only available for HDMI 1, HDMI 2, HDMI 3 and Component in format 1080i
or 1080p.
Displays moving pictures that is more faithful to the original source by matching
the colour space of source.
~
• The setting is fixed to "Normal" when the input signal is HDMI (RGB), even if
"x.v.Colour" is selected.
• Only available for HDMI 1, HDMI 2, HDMI 3 and Component in format 720p,
1080i or 1080p.
Selects the option (sRGB, sYCC, Adobe RGB) to match the output colour space
within the output signal from the equipment connected to the HDMI, component
input jacks or USB.
~
• Select "sYCC" when using the equipment that supports "x.v.Colour".
• Only available for HDMI 1, HDMI 2, HDMI 3 and Component in format 1080i
or 1080p.
• Not available when "Colour Space" is set to "Wide" (page 23).
Sets the timer to turn on/off the TV.
Sleep Timer
Sets a period of time after which the TV automatically switches itself into
standby mode.
When the Sleep Timer is activated, the
lights up in orange.
z
• If you switch off the TV and switch it on again, "Sleep Timer" is reset to
"Off".
• "Sleep timer will end soon. Power will be turned off" appears on the screen one
minute before the TV switches to standby mode.
(Timer) indicator on the TV (front)
Continued
25
GB