Casio 5594 Operation Manual page 40

Pedometer
Q1
Displayed step count is not correct.
While the watch is on your wrist, the
pedometer may detect non-step movements
and count them as steps.
Pedometer
l
Also, step count problems can also be caused
by how the watch is being worn and abnormal
arm movement while walking.
Causes of Incorrect Step Count
l
Q2
The step count does not increase.
The step count is not displayed at the
beginning of a walk in order to avoid
miscounting of non-walking movements.
It appears only after you have continued
walking for about 10 seconds, with the number
of steps you took during the first 10 seconds
included in to the total.
Q3
[ERR] appears when using the
pedometer.
[ERR] (error) indicates that sensor operation
is disabled because of sensor or internal
circuitry malfunction.
If the indicator remains on the display for more
than three minutes or if it frequently appears,
it could indicate a faulty sensor.
Contact a CASIO service center or your
original retailer.
Alarm
Q1
The alarm does not sound.
Is the alarm setting turned on? If it isn't, turn it
on so it will sound.
Configuring Alarm Settings
l
Operation Guide 5594
Hand Movement and Watch
Screen Indications
Q1
I don't know what mode the watch is
in.
You can determine the current mode by
checking the watch display. Use (E) to
navigate between modes.
Navigating Between Modes
l
Q2
All hands are stopped and buttons do
not work.
The battery is dead. Have the battery
replaced.
Battery Replacement
l
Q3
The hands suddenly start moving at
high speed.
This is due to one of the reasons below, and
does not indicate malfunction. Simply wait
until normal hand movement resumes.
Watch is connected with a phone to adjust
●
its time setting.
Auto Time Adjustment
l
Q4
The current time indicated by the
watch is off by one hour or 30
minutes.
The summer time setting may not be correct.
Select the correct setting.
Changing the Home City Summer Time
l
Setting
Q5
The time indicated by the hands is
different from the digital time.
Strong magnetism or impact can cause the
hands to go out of alignment. Adjust hand
alignment.
Adjusting Hand Alignment
l
Check the information below to find out how
●
to align the hands manually.
Hand Alignment Adjustment
l
Battery
Q1
is flashing on the digital display.
This indicates that battery power is getting
low.
Have the battery replaced.
Battery Replacement
l
Q2
[RECOVER] is flashing on the digital
display.
[RECOVER] may appear on the display when
the watch's battery power is low, or if you use
the light or other function a number of times
during a short period, which momentarily
causes the battery level to go low. If this
happens, all watch functions, except for
timekeeping, are disabled.
If [RECOVER] remains on the display or if it
keeps appearing, it may indicate that the
battery needs to be replaced.
40