Viewing Pictures From Connected Equipment - Sony 4-106-868-11(1) Operating Instructions Manual

Viewing Pictures from
Connected Equipment
Switch on the connected equipment, then
perform one of the following operation.
For equipment connected to the scart
sockets using a fully-wired 21-pin scart lead
Start playback on the connected equipment.
The picture from the connected equipment
appears on the screen.
For an auto-tuned VCR/ DVD recorder
In analogue mode, press PROG +/–, or the
number buttons, to select the video channel.
For a USB device
See page 26.
For a Network device
See page 30.
For other connected equipment
Press / to display a list of connected
equipment. Press F/f to select the desired
input source, then press
The highlighted item is automatically selected
if you do not perform any operation for two
seconds after pressing F/f.
If you have set an input source to "Skip" in the
"AV Preset" menu (page 40), that input source
does not appear in the list.
z
To return to normal TV mode, press DIGITAL or
ANALOG.
Using the Options menu
Press OPTIONS to display the following
options when viewing pictures from connected
equipment.
Option Description
Picture Mode (except See page 35.
PC input mode)
Display Mode (in PC See page 35.
input mode only)
Sound Mode See page 36.
Surround See page 36.
Speaker See page 41.
Motionflow (except See page 37.
PC input mode)
.
Option Description
PIP (in PC input See page 26.
mode only)
PAP (except PC input See page 25.
mode and DIGITAL
MEDIA PORT
mode)
Auto Adjustment (in See page 39.
PC input mode only)
Horizontal Shift (in See page 39.
PC input mode only)
Sleep Timer (except See page 38.
PC input mode)
Power Saving See page 37.
Device Control See page 23.
(Menu) (in DIGITAL
MEDIA PORT mode
only)
Control Panel (in See page 23.
DIGITAL MEDIA
PORT mode only)
Device Control (in See page 29.
HDMI mode only)
To view two pictures simultaneously
– PAP (Picture and Picture)
You can view two pictures (external input and
TV programme) on the screen simultaneously.
Connect an optional equipment (page 22), and
make sure that images from the equipment
appear on the screen (page 25).
~
• This function is not available for a PC input and
DIGITAL MEDIA PORT input.
• You cannot change the size of the pictures.
• You cannot display analogue TV video in the TV
programme picture while displaying AV1, AV2 or
AV3 video in the external inputs picture.
1
Press OPTIONS.
2
Press F/f to select "PAP", then press
The picture from the connected equipment
is displayed on the left, and the TV
programme is displayed on the right.
3
Press the number buttons or PROG +/– to
select the TV channel.
To return to single picture mode
RETURN.
Press
z
The highlighted picture is audible. You can switch
the audible picture by pressing G/g.
.
25
(Continued)
GB