The Boot Management Menu - Lenovo Flex System Fabric CN4093 Application Manual
How to configure and use the enterprise nos 8.4 software on the 10 gb converged scalable switch
Hide thumbs
Also See for Flex System Fabric CN4093:
- Application manual (598 pages) ,
- Installation manual (72 pages) ,
- User manual (58 pages)
Table of Contents
Advertisement
The Boot Management Menu
78
CN4093 Application Guide for ENOS 8.4
The Boot Management menu allows you to switch the software image, reset the
switch to factory defaults, or to recover from a failed software download.
You can interrupt the boot process and enter the Boot Management menu from the
serial console port. When the system displays Memory Test, press <Shift+B>. The
Boot Management menu appears.
Boot Management Menu
I - Change booting image
C - Change configuration block
R - Boot in recovery mode (tftp and xmodem download of images to
recover switch)
Q - Reboot
E - Exit
Please choose your menu option:
The Boot Management menu allows you to perform the following actions:
The Boot Management menu allows you to perform the following actions:
To change the booting image, press I and follow the screen prompts.
To change the configuration block, press C and follow the screen prompts.
To boot in recovery mode press R. For more details see "Boot Recovery Mode"
on page
79.
To restart the boot process from the beginning, press Q.
To exit the Boot Management menu, press E. The booting process continues.
Advertisement
Table of Contents
