General Safety Rules; C1 Introduction; C1.1 Protection Devices Installed On The Machine; C1.1.1 Guards - Electrolux EGWSSIC Manual

C
C1 Introduction
The machines are provided with electric and/or
mechanical safety devices for protecting workers and
the machine itself. Therefore the user must not remove
or tamper with such devices.
The Manufacturer declines any liability for damage due
to tampering or their non-use.
C1.1 Protection devices installed on the machine
C1.1.1 Guards
The guards on the machine are:
- fixed guards (e.g. casings, covers, side panels,
etc.), fixed to the machine and/or frame with screws
or quick-release connectors that can only be
removed or opened with tools;
- interlocked movable guards (front panels) for
accessing inside the machine;
- machine electrical equipment access doors, made
from hinged panels openable with tools. The door
must not be opened when moving the machine, if
inside the door there is equipment which is danger-
ous when under tension or pressure.
ATTENTION!
Several illustrations in the manual show
the machine, or parts of it, without guards
or with guards removed. This is purely for
explanatory purposes. Do not use the
machine without the guards or with the
protection devices deactivated.
C1.2 Safety signs to be placed on the machine or
near the work area
MEANING
P Do not oil, lubricate, repair and
R adjust moving parts.
O
H
Do not remove the safety devices.
I
B
I
Do not use water to extinguish fires
T
(placed on electrical parts).
I
O
N
DANGER OF CRUSHING HANDS
D
A
DANGER OF BURNS
N
G
E
DANGER OF ELECTROCUTION
R
(placed on electrical parts with indi-
cation of voltage).

GENERAL SAFETY RULES

ATTENTION!
Do not remove, tamper with or
make the
machine illegible.
C2 Decommissioning
When the machine is no longer to be used, make it
unusable, removing the wiring from the power supply
and the water connections.
C3 Instructions regarding use and maintenance
Risks mainly of a mechanical, thermal and electrical
nature exist in the machine.
Where possible the risks have been neutralised:
• directly, by means of adequate design solutions,
• indirectly by using guards, protection and safety
devices.
Any anomalous situations are signalled on the control
panel display.
During maintenance several risks remain, as these
could not be eliminated, and must be neutralised by
adopting specific measures and precautions.
Do not carry out any checking, cleaning, repair or mainte-
nance operations on moving parts.
Workers must be informed of this prohibition by means
of clearly visible signs.
To guarantee machine efficiency and correct opera-
tion, periodical maintenance must be carried out
according to the instructions given in this manual. In
particular, make sure to periodically check correct
operation of all the safety devices and the insulation of
electrical cables, which must be replaced if damaged.
ATTENTION!
Machine maintenance opera-
tions must only be carried out
by specialised
provided with all the appropri-
ate personal protection equip-
ment (safety shoes, gloves,
glasses, overalls, etc.), tools,
utensils and ancillary means.
ATTENTION!
Never operate the machine,
removing, modifying or tam-
pering with the guards or pro-
tection and safety devices.
labels on the
Technicians
9