Airprotocol; Setairprotocol - Siemens SIMATIC RF310M Function Manual

3.4.5

AirProtocol

AirProtocol : string {get, set}
Property
A string identifying the current or desired air protocol
Exceptions
RfReaderApiException
Note
Sets a new air protocol type or returns the air protocol type currently in use.
Valid protocol types are:
● EPCC1G2
● ISO18000-6B
● RF300
● ISO15693
Remember that not all functions are supported for all protocol types and that there may be
restrictions on the data ranges.
KillTag and LockEPCGen2Tag are only supported for the EPCC1G2 protocol. Invoking these
functions while another protocol e.g. ISO18000-6B is set will result in an exception.
Version information
Supported in RFID Reader Interface: since V1.0
3.4.6

SetAirProtocol

SetAirProtocol( protocolName : string, initialQ : int) : void
Parameters
● protocolName
● initialQ
Return value(s)
None
Mobile Reader
Function Manual, 02/2009, J31069-D0198-U001-A1-0076
Error while communicating with the reader service. Check the Error
member for more information.
A string specifying the air protocol to be set.
An integer value that denotes the initialQ value used for collision detection with EPC
Class1 Gen 2 tags.
This parameter is ignored if an air protocol other than 'EPCC1G2' is specified.
RFID Reader Interface Reference
3.4 IRfReaderApi
47