Sony DVP-NS715P Operating Instructions Manual page 22

Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
B
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
B-2
DIGITAL OUT
COAXIAL OPTICAL
PCM/DTS/DOLBY DIGITAL
to DIGITAL OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to coaxial or optical
digital input
[Speakers]
Front (L)
Front (R)
l: Signal flow
z Hint
B-1
In connection
audio/video cord instead of using a separate stereo
audio cord.
22
CD/DVD player
DIGITAL OUT LINE OUT S VIDEO COMPONENT VIDEO OUT
OUT
COAXIAL OPTICAL AUDIO VIDEO Y
PCM/DTS/DOLBY DIGITAL R L
1 1 P
B
2 2
P R
Coaxial digital
cord (not supplied)
or
Stereo amplifier (receiver)
, you can use the supplied
SELECTABLE
INTERLACE
PROGRESSIVE
SCAN SELECT
Stereo audio cord
(not supplied)
or
(white)
MD deck/DAT deck
Note
If you select one of the TVS effects (page 49) while
playing a disc, no sound will come from your
speakers with the
B-1
(white)
R
1
(red)
2
to LINE OUT L/R (AUDIO) 1 or 2
(red)
to audio input
connection.
B-2
. If the amplifier
.
B-2
B-1
LINE OUT
AUDIO VIDEO
L