Sony DVP-NS530 Operating Instructions Manual page 23

Connecting to an AV amplifier (receiver) with a digital input jack having
D
a Dolby Digital, MPEG audio or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio, or DTS decoder function
of your AV amplifier (receiver).
CD/DVD player
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL
to DIGITAL OUT
(COAXIAL or OPTICAL)
Coaxial digital cord
(not supplied)
to coaxial digital input
[Speakers]
Rear (L)
Subwoofer
Rear (R)
l: Signal flow
Note
After you have completed the connection, be sure to
set "DOLBY DIGITAL" to "DOLBY DIGITAL"
and "DTS" to "ON" in Quick Setup (page 24). If
your AV amplifier (receiver) has an MPEG audio
decoder function, set "MPEG" to "MPEG" (page
67). Otherwise, no sound or a loud noise will come
from the speakers.
LINE OUT S VIDEO COMPONENT VIDEO OUT
OUT
OPTICAL R-AUDIO-L VIDEO Y C B C R
COAXIAL
AV amplifier (receiver) having
a decoder
D
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
OPTICAL
or
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to optical digital input
[Speakers]
Centre
Front (L)
Front (R)
23