Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Sinclair SMG-01
Summary of Contents for Sinclair SMG-01
- Page 1 USER'S MANUAL MODBUS GATEWAY SMG-01...
- Page 2 “Original instructions” IMPORTANT NOTE: Read this manual ca r efully befo r e installing or operating your new air conditioning unit. Make sure to save this manual for future reference.
- Page 3 (5) The final right to interpret for this instruction manual belongs to SINCLAIR CORPORATION Ltd.
-
Page 4: Table Of Contents
Contents 1 Safety Notices (Please be sure to abide) ..........1 2 Product Composition................1 3 Function statement ................2 4 Product Installation ................2 4.1 Installation location................. 2 4.2 Network topological graph..............2 4.3 Wiring specification ................ 3 4.4 Wire selection ................4 5 Instruction for use................ -
Page 5: Safety Notices (Please Be Sure To Abide)
Gateway Kit 1 Safety Notices (Please be sure to abide) Warning: If not abide strictly, it may cause severe damage to the unit or the people. Note: If not abide strictly, it may cause slight or medium damage to the unit or the people. This sign indicates that the operation must be prohibited. -
Page 6: Function Statement
Gateway Kit 3 Function statement When the user needs to conduct central control/remote monitor, connect the product to the indoor unit of communication network. The gateway plays the role of connecting the main board of indoor unit and central controller/remote monitor. 4 Product Installation Installation location According to the installation requirements, the box of the gateway shall be used... -
Page 7: Wiring Specification
Gateway Kit Wiring specification (1) Communication cord L2 from the gateway shall be connected to the 6-core needle holder. (2) Open the upper cover of gateway, you can see 4 screws wiring terminals with the mark of A, A, B and B separately. Figure 4-2 Mark diagram of wiring terminal... -
Page 8: Wire Selection
Gateway Kit (3) Choose either of AB wiring terminal, connect it to the central controller/remote monitor; if there are multiple gateways, the other AB wiring terminal shall be connected to the next gateway. Figure 4-3 Diagram of wiring terminal Wire selection Model selection of communication cord for gateway, central controller/remote controller:... -
Page 9: Instruction For Use
Gateway Kit Code of Series Wire type communication Remark model cord When the communication distance exceeds 800m, a Ⅴ twisted-pair AWG24 photoelectric isolation （2-core） repeater shall be added 6-core communication cord standard configuration 5 Instruction for use Indicator instruction When the indicator is flashing normally, it means the gateway is operating normally. - Page 12 SINCLAIR CORPORATION Ltd. 1-4 Argyll St. London W1F 7LD Great Britain www.sinclair-world.com This product was manufactured in China (Made in China). REPRESENTATIVE SINCLAIR Global Group s.r.o. Purkynova 45 612 00 Brno Czech Republic TECHNICAL SUPPORT SINCLAIR Global Group s.r.o. Purkynova 45...