Sony DVP-NS29 Operating Instructions Manual page 20

7
Press X/x to select the setting that
matches your TV type.
If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 57)
If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 57)
8
Press ENTER.
The Setup Display for selecting the type
of video signal output from the LINE
(RGB)-TV jack appears.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
LINE:
9
Press X/x to select the type of
signal you want to output from the
LINE (RGB)-TV jack.
Video signals
• VIDEO (page 57)
S video signals
• S VIDEO (page 57)
RGB signals
• RGB (page 57)
10
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
NO
11
Press X/x to select the type of
jack (if any) you are using to
connect to an amplifier (receiver),
then press ENTER.
20
JACKET PICTURE
VIDEO
VIDEO
S VIDEO
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
If you did not connect an AV amplifier
(receiver), select "NO," then go to step
15.
If you connected an AV amplifier
(receiver) using just an audio cord, select
"YES: LINE OUTPUT L/R (AUDIO),"
then go to step 15.
If you connected an AV amplifier
(receiver) using a coaxial digital cord,
select "YES: DIGITAL OUTPUT."
12
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
If your AV amplifier (receiver) has a
Dolby Digital decoder, select "DOLBY
16:9
ON
DIGITAL." Otherwise, select "D-PCM."
RGB
13
Press ENTER.
"DTS" is selected.
14
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
If your AV amplifier (receiver) has a
DTS decoder, select "ON." Otherwise,
select "OFF."
15
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, set "MPEG" to
"MPEG" (page 60).
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX: DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS: DOLBY DIGITAL
48kHz/96kHz PCM:
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX: DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
48kHz/96kHz PCM:
OFF
STANDARD
ON
D-PCM
D-PCM
48kHz/16bit
OFF
STANDARD
ON
D-PCM
PCM
OFF
OFF
ON