Sony DVP-M35 Operating Instructions Manual page 8

Getting Started
z
If you have a digital component such as an amplifier
with a digital connector, DAT or MD
Connect the component via the DIGITAL OUT OPTICAL
or COAXIAL connector using an optical or coaxial digital
connecting cord (not supplied).
When you play a DVD, set "DIGITAL OUT" in "INITIAL
SETUP 2" to "PCM" in the setup display. (page 37)
pWhen using an optical digital connectiong cord
Optical digital connectiong cord
Take off the cap and plug in the optical digital
connectiong cord.
CD/DVD player
OPTICAL
PCM/
DOLBY DIGITAL (AC-3)
DIGITAL OUT
pWhen using a coaxial digital connectiong cord
Coaxial digital connectiong cord
CD/DVD player
OPTICAL
PCM/
DOLBY DIGITAL (AC-3)
DIGITAL OUT
Notes
• Refer to the instructions supplied with the component
to be connected.
• You cannot make digital audio recordings of discs
recorded in Dolby* Digital (AC-3) format directly
using an MD deck or DAT deck.
When you make the connections above, do not set
"DIGITAL OUT" in "INITIAL SETUP 2" to "DOLBY
DIGITAL/PCM." If you do, a loud noise will
suddenly come out from the speakers, affecting
your ears or causing the speakers to be damaged.
* Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol a are
trademarks of Dolby Laboratories.
Confidential Unpublished Works. ©1992-1997 Dolby
Laboratories, Inc. All rights reserved.
EN
8
(not supplied)
Amplifier with a
digital connector, MD
deck, DAT deck, etc.
DIGITAL IN
COAXIAL
OPTICAL
(not supplied)
Amplifier with a
digital connector, MD
deck, DAT deck, etc.
COAXIAL DIGITAL IN
COAXIAL
z
If you have a digital component with a built-in Dolby
Digital decoder
Connect the component via the DIGITAL OUT OPTICAL
or COAXIAL connector using an optical or coaxial digital
connectiong cord (not supplied). When the component
with a built-in Dolby Digital decoder is connected, the
player plays DVDs with sound recorded in Dolby Digital
(AC-3) format while producing the effect of being in a
movie theater or a concert hall.
In the setup display, set "DIGITAL OUT" in "INITIAL
SETUP 2" to "DOLBY DIGITAL/PCM." (page 37)
pWhen using an optical digital connectiong cord
Optical digital connectiong cord
(not supplied)
Take off the cap and plug in the optical digital
connectiong cord.
CD/DVD player
OPTICAL COAXIAL
PCM/
DOLBY DIGITAL (AC-3)
DIGITAL OUT
pWhen using a coaxial digital connectiong cord
Coaxial digital connectiong cord
(not supplied)
CD/DVD player
OPTICAL COAXIAL
PCM/
DOLBY DIGITAL (AC-3)
DIGITAL OUT
Note
Refer to the instructions supplied with the component to
be connected.
Component with a
built-in Dolby Digital
decoder
DIGITAL IN
OPTICAL
Component with a
built-in Dolby Digital
decoder
DIGITAL IN
COAXIAL